Battery Management

---

Rutland Windcharger

Charge Controllers.

There are three elements to good DC wind turbine system control:

• Battery input management (constant voltage from variable windspeed),
• Protection from overcharging to keep the load on the wind turbine at all times and prevent overspeeding with high wind and no load)
• Preparation (if required) of the output voltage to the end user which might be 12Volts or 24 volts DC - the battery voltage or 240volts AC out via an Inverter.

BATTERY INPUT MANAGEMENT

An all in one unit to regulate voltage into the battery irrespective of wind speed , monitor charge Current (amps), and indicate battery state.

Item	Voltage	Power	Part Number	Price inc VAT at 17.5%
RWS60 Charge Controller for Rutland 500	12V	60Watts	132	69.95
RWS200 Charge Controller for Rutland 913	12V	200Watts	133	109.94
RWS200 Charge Controller for Rutland 913	24V	200Watts	134	109.94

PROTECTION FROM OVERCHARGING

Shunt Regulators

ITEM	Voltage	Power	Part Number	Price including VAT at 17.5%
SR60 for Rutland 500	12V	60Watts	135	28.95
SR120 for Rutland 910 standard	12V	120Watts	136	41.95
SR120 for Rutland 910 standard	24V	120Watts	137	41.95
SR200 for Rutland 913/FM910	12V	200Watts	138	49.95
SR200 for Rutland 913 /FM910	24V	200Watts	139	49.95

CONNECTION BOX

To make quick and secure connections which link the battery, charge controller,

shunt regulator and solar panels use an interconnection box

ITEM	Voltage	Power	Part Number	Price inc VAT
Connection Box	0-24 Volts	200 Watts	140	18.50

[Back to homepage]

[Back to the Practically Green Lifestyle Shop]

[Back to the Wind Turbine / Solar Panel drawing]