HOME
8-Port Managed VDSL Concentrator
Product ID: NV-800S
8-Port Managed VDSL Concentrator
 

The NV-800S Managed VDSL Concentrator provides an intelligent solution for delivering network and broadband services to the SOHO and MTU/MDU with speeds up to 15Mbps and distances up to 5,000 feet (1524m) over existing phone lines.

The Netsys Low-Density VDSL solution including the NV-800S Managed VDSL Concentrator and NV-200 VDSL CPE (Customer Premise Equipment) Modem delivers everything needed to quickly deploy a high-speed Ethernet-based network for providing high-speed Internet access and video-on-demand services, in addition to voice services. The NV-800S' 10/100 Ethernet Uplink Port connects to a Router or Ethernet Switch and acts as the bridge to the Internet for end-users connected through the NV-800S' 8 VDSL ports. The second 10/100 Ethernet Uplink Port may be used for cascading additional NV-800S units or connecting to a video-on-demand server or other IP capable system for distributing content to the end-user. The NV-800S also features built-in POTS/ISDN splitters so that the VDSL service can share the existing phone line with the end-users' POTS/ISDN telephone service, thus reducing cost and overall wiring requirements. The POTS/ISDN lines and VDSL links connect to standard RJ-11 connectors on the front of the NV-800S and are broken out on the end-user side by the NV-200 CPE Modem, which features one 10/100 Ethernet Port and one POTS/ISDN Port. For higher density applications, the Netsys NV-2400S 24-Port Managed VDSL Concentrator and standard Ethernet Switches (like the Netsys NS-2024S Gigabit Ethernet Switches) can be used to provide additional expansion.

The intelligent web-based management software, allows for streamlined configuration of the NV-800S, as well as NV-200 CPE devices through a single IP address. The NV-800S can be configured on a per-link basis to support 5 Mbps up to 5,000-feet (1524m), 10 Mbps up to 4,000 feet (1219m) and 15 Mbps up to 3,200 feet (975m). Additionally, the signal-to-noise ratio (SNR) feature can be utilized as an indication to the service provider as to the quality of the link between the NV-800S and the CPE.

The NV-800S is also a fully managed layer 2 switch that offers quality of service (QOS), link aggregation dynamic trunking groups, multicast, security, GVRP, IGMP for VOD (video on demand), SNMP RMON and web-based switch network management. The NV-800S provides high and low priority queuing per port based on 802.1p QOS. The NV-800S provides security through 802.1Q port-based virtual local-area network (VLAN) and supports port based network access control.

The NV-800S provides comprehensive hardware diagnostics and is easy to maintain. The NV-800S is one rack-unit high, 10-inches deep (254mm) and can be easily mounted in a rack/cabinet or placed on a desktop. The resulting compact, cost-effective form factor offers systems integrators, small business and building owners an attractive low-density VDSL solution.

Features

  • 8 full-duplex VDSL links up to 15 Mbps and distances up to 5000 feet via RJ-11 connectors
  • 8 corresponding POTS/ISDN lines via RJ-11 connectors
  • Built-in POTS/ISDN splitter for each VDSL port
  • Dual auto-sensing RJ-45 10/100 BaseT ports
  • Signal-to-Noise Ratio indicator for troubleshooting and determining maximum link distances
  • Flexible configuration of network resources via web-based interface
  • Layer 2 and Layer 3 Switch Features
  • Compact 1U rack mount design
  • Compliant with ETSI, ITU and ANSI standards

Standards

  • 802.1ad Link Aggregation/Port Trunking
  • 802.1d Spanning Tree
  • 802.1p QOS with Priority Queuing
  • 802.1Q VLAN Tagging
  • 802.1v Protocol-Based VLAN
  • 802.3 Ethernet
  • 802.3u Fast Ethernet
  • 802.3x Flow Control

Detailed Specifications

Package Contents
  • 1 X NV-800S Unit
  • 1 X User Manual CD
  • 1 X AC Power Cord
  • 2 X Rack Mount Brackets
  • 4 X Mounting Screws
  • 4 X Plastic Feet
Remote Unit
Client Port Features
  • 8 VDSL links presented on RJ-11 connectors with built-in surge protection
    • 5 Mbps up to 5000 feet (1524m)
    • 10 Mbps up to 4000 feet (1219m)
    • 15 Mbps up to 3200 feet (975m)
  • Signal to Noise Ratio (SNR) Line Quality Monitoring
  • Utilizes QAM Modulation
  • Transmitter operates between 4.5 to 7.9 MHz
  • Receiver operates between 0.9 to 3 MHz
  • Spectral compatibility with xDSL, ISDN (2B1Q/4B3T), and HomePNA
POTS/ISDN Features
  • 8 POTS/ISDN lines presented on RJ-11 connectors with integrated POTS/ISDN splitters
  • Band pass filter spectrum: 0 - 680 KHz
Uplink Port Features
  • 2 X 10/100 Mbps auto-sensing full or half-duplex RJ-45 Ethernet uplink port
  • Supports flow control for full-duplex operation
  • Supports back pressure for half-duplex operation
  • Cascade up to 4 units
  • Additional expansion using an Ethernet GigaSwitch
Console Port
  • DB-9F RS-232 connection for out-of-band console access
LEDs
  • 8 X VDSL Link Indicators
  • 3 X LEDs per 10/100Base-TX Ethernet Uplink port (Link/Activity, Speed, Duplex Status)
  • 1 X Power LED
  • 1 X Post LED
Switching Features
  • Switching Method: Store-and-Forward
  • MAC Address Table: 8K addresses
  • Supports MAC Address filtering
  • Supports Broadcast Storm Filtering
  • Supports Port Based VLAN
  • Supports VLAN Tagging:
    • 256 VLAN Groups
    • 1 to 4094 VLAN IDs
    • Ingress Filtering
    • GARP/GVRP
  • Supports Protocol Based VLAN
  • Supports Quality of Service (QOS)
  • Supports Port Mirroring/Sniffing
  • Supports Port Trunking/Link Aggregation (LACP)
  • Supports Spanning Tree Protocol
  • Supports IGMP Snooping (Multicast) for Video On Demand (VOD) Applications
  • 512 Multicast IP Groups
  • Supports Port Based Network Access Control
  • Provides DHCP Client
Configuration & Management Features
  • System Configuration/Remote Network Configuration: CLI, Telnet, Web browser
  • Supports In-Band/Out-Of-Band Management
  • Supports SNMP
    • RFC 1493 Bridge MIBs
    • RFC 1213 MIB II
    • RFC 1643 Ethernet MIB
    • Enterprise MIB
  • Supports RMON Groups 1, 2, 3, 9 (RFC 1757)
  • Supports Firmware Upgrade via TFTP/XMODEM
  • Fan and Internal Temperature Monitor and Management
  • Front panel reset button
Mounting Method
  • 19" Rack Mount (1RU) or Desktop
Dimensions
  • 16.25" x 10.13" x 1.69" (413mm x 257mm x 43mm)
Shipping Weight
  • 8 lbs. (3.63Kg)
Power Requirements
  • Internal AC 100-240 volts; 50-60 Hz.; 2 Amp
    IEC-320 power plug on back of unit
Operating Temperature
  • 41 to 122F (5 to 50C)
    1 cooling fan located on back of unit
Humidity
  • 10% to 90% Non-Condensing
Agency Compliance
  • FCC Part 15 Class A, CE