Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com - Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com - Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Plastic Dual-in-Line
Ceramic Dual-in-Line
Flat Pack Package
Leadless Chip Carrier
Hybrid Packages
Optocouplers and Optoelectronic Catalogue
Home Page
Note! if the images appear too small on your screen, click here
If you need to print this document and an image falls across two sheets, click on the image with your right mouse button to view and print it by itself.
Table of measurements (mm) in the diagrams that follow:
| Number of Pins | 4 | 6 | 8 | 16 |
| Chip | ||||
| Width (pin shoulder to pin shoulder) | 7.62 | |||
| Width (pin tip to pin tip) | 7.62 | |||
| Body (chip without pins) | ||||
| Length | 4.6 | 7.3 | 9.80 | 19.84 |
| Width | 6.5 | |||
| Height | 3.5 | |||
| Pins | ||||
| Midpoint to adjacent Midpoint | 2.54 | |||
| Foot Length | 1.0 | |||
| Angle | 13° to vertical | |||
| Chip Belly Height above Pin Foot | 3.5 | |||
Table of measurements (mm) in the diagrams that follow:
| Number of Pins | 6 | 8 | 16 |
| Chip | |||
| Width (pin shoulder to pin shoulder) | 7.62-8.12 | 8.13 Max | |
| Width (tip midpoint to tip midpoint) | 7.37-7.87 | ||
| Width Surface Mount (tip midpoint to tip midpoint) | 9.37 Min | ||
| Body (chip without pins) | |||
| Length | 8.94-9.34 | 9.60-9.98 | 20.06-20.83 |
| Width | 7.16-7.56 | ||
| Height | 2.80 Min | 3.82 Max | |
| Pins (shoulder=wider part connected to body; tip=thinner part connecting to board) | |||
| Midpoint to adjacent Midpoint | 2.54 Typ | 2.29-2.79 | |
| First to Last Midpoint | 4.95-5.20 | 7.49-7.74 | |
| Tip Height | 3.50 Min | 3.81 Min | |
| Tip Width | 0.40-0.50 | 0.36-0.51 | |
| Tip Thickness | 0.22-0.30 | 0.20-0.33 | |
| First and Last Shoulder Length | 1.37 Typ | 1.04 Typ | |
| Other Shoulder Widths | 1.37 Typ | ||
| Chip Belly to Pin Shoulder Bottom | 0.63-1.14 | 0.51 | |
Table of measurements (inches!) in the diagram that follows:
| Leads | 16 |
| Over All (Body + Leads) | |
| Length | 0.410 ± 0.008 |
| Height | 0.130 Max |
| Width at Belly | 0.190 ± 0.006 |
| Lead Height above Base of Belly | 0.026 Max |
| Body excluding Leads | |
| Width | 0.270 ± 0.005 |
| Lead | |
| Length | 0.3 Min |
| Width | 0.017 ± 0.002 |
| Height (Thickness) | 0.005 ± 0.001 |
| Midpoint to Adjacent Midpoint | 0.05 |
| First Midpoint to Last Midpoint | 0.350 |
Table of measurements (mm) in the diagrams that follow:
| Terminals | 16 | 20 |
| Overall | ||
| Length/Width | 6.35 ± 0.20 | 8.90 |
| Height | 2.0 Max | 1.80 |
| Terminal | ||
| Midpoint to Adjacent Midpoint | 1.27 | |
| Width | 0.64 ± 0.08 | |
| Length | 0.76 Typ | |
| Inner Square | ||
| Length/Width | 5.64 ± 0.13 | |
Table of measurements (mm) in the diagrams that follow:
| Terminals | 5 | 10 |
| Body | ||
| Length | 2.2 | 6.7 |
| Width | 2.7 | 4.5 |
| Height | 1.5 Max | 1.8 Max |
| Base Height | 0.64 | 0.6 |
| General Terminal Measurements | ||
| Length | 1.0 | |
| Width | 0.6 | |
| Smallest Distance to Body Edge | 0.13 | |
| Specific Terminal Distances to Body End | ||
| 5, 10 | 0.43 | |
| 6, 9 | 1.73 | |
| 2, 3, 7, 8 | 2.77 | |
