ISOCOM LTD: BSI9000 and CECC20000 Approved Manufacturer

Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com - Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055

Circuit
Features
Description
Absolute Maximum Ratings
Electrical Characteristics

Similar Optocouplers
Home Page


MOC3009, 3010, 3011, 3012
OPTICALLY COUPLED ISOLATORS

Circuit

Features

Rated Impulse Voltage (Transient Overvoltage).
Insulation Test Voltage (Partial Discharge Test Voltage) VPD=1.6 kV.
Creeping Current Resistance according to VDE 0303/IEC 112
Rated Insulation Voltage (RMS includes DC) VIOWM=250 VRMS
Rated Recurring Peak Voltage (Repetitive) VIORM=250 VRMS
Comparative Tracking Index CTI=275

Description

The PT3009 series are constructed from a Gallium Arsenide Infrared Emitting Diode and Silicon Triac Bi directional (double Thytistor) Detector, housed in a plastic package. Surface Mount Option Available.
All electrical parameters are 100% tested by manufacturing. Specifications are guaranteed to a cumulative 0.65% AQL.

Absolute Maximum Ratings


Emitter

Reverse Voltage:
Forward Current:
Forward Surge Current:
Power Dissipation:
Derate Linearly:
Junction Temperature:
6V
60mA
3A
100mW
1.33mW/°C above 25°C
125°C

Detector

Off-State Output Terminal Voltage:
On-State RMS Current:
Peak Surge Current:
Collector Peak On-State Current:
Power Dissipation:
Junction Temperature:
250V
100mA
1.2A
2A
300mW
125°C

Coupled Device

Total Power Dissipation:
Storage Temperature Range:
Ambient Temperature Range:
Soldering Temperature:
330mW
-55°C to +125°C
-40°C to +100°C
260°C

Electro-optical Characteristics (Ta=25°C)

INPUT DIODE PARAMETER CONDITIONS TYP MAX UNIT
VF Forward Voltage IF=10mA
1.5 V
IR Reverse Current VR=3V
100 µA
OUTPUT PHOTOSENSOR




IDRM Peak Blocking Current, Either Direction VDRM=400V
100 nA
VTM Peak On-State Voltage, Either Direction ITM=100mA Peak
3 V
dV/dt Critical Rate of Rise of Off-State-Voltage RL=4kohm 15
V/µs
COUPLED PARAMETER CONDITIONS TYP MAX UNIT
IFT LED Trigger Current Required to Latch Output Main Terminal Voltage=3V


MOC3009
30 mA
MOC3010
15 mA
MOC3011
10 mA
MOC3012
5 mA
IH Holding Current, Either Direction
100
µA

Notes

1. Measured with input leads shorted together and output leads shorted together.

Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date.

Contents