Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com - Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com
- Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Circuit
Features
Description
Absolute Maximum
Ratings
Electrical Characteristics
Similar Optocouplers
Home Page
4000 Volt Isolation.
2mm (min) Internal Separation
8mm (min)
Creeping Distance between Emitter and Detector Leads
The IS614 and IS615 are optically coupled isolators each consisting of a
Gallium Arsenide infrared emitting diode and an NPN silicon phototransistor
mounted in a standard 6-pin dual-in-line package with an internal separation of
2mm minimum between emitter and detector. Surface Mount Option Available.
All electrical parameters are
100%. Specifications are guaranteed to a cumulative 0.65% AQL
Absolute Maximum Ratings (25°C) | |
| Storage Temperature: Operating Temperature: Lead Soldering: Input-To-Output Isolation Voltage: |
-55°C to +150°C -55°C to +100°C 260°C for 10s, 1.6mm from case 4000Vrms |
Input Diode | |
| Forward DC Current: Reverse DC Voltage: Peak Forward Current: Power Dissipation: Derate Linearly: |
60mA 6V 3A (1µs p.w. 300pps) 100mW 1.33mW/°C above 25°C |
Output Transistor | |
| Collector-Emitter Voltage BVCEO: Emitter-Base Voltage BVEBO: Collector-Base Voltage BVCBO: Power Dissipation: Derate Linearly: |
40V 7V 70V 300mW 4.00mW/°C above 25°C |
| INPUT | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| VF | Forward Voltage | IF=10mA | 0.8 | 1.5 | V | |
| IF=10mA, TA=-55°C | 0.9 | 1.7 | V | |||
| IF=10mA, TA=+100°C | 1.4 | V | ||||
| IR | Reverse Current | VR=6.0V | 10 | µA | ||
| OUTPUT | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| BVCEO | Collector-Emitter Voltage | IC=1mA | 40 | V | ||
| BVEBO | Emitter-Base Voltage | IE=0.1mA | 7 | V | ||
| BVCBO | Collector-Base Voltage | IC=0.1mA | 70 | V | ||
| ICEO | Collector-Emitter Dark Current | VCE=10V, IF=0 | 50 | nA | ||
| CCE | Collector-Emitter Capacitance | VCE=10V, f=1MHz | 2.0 | pF | ||
| COUPLED | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| IC/IF | DC Current Transfer Ratio | |||||
| IS614 | IF=10mA, VCE=10V | 15 | % | |||
| IS615 | 50 | % | ||||
| RIO | Isolation Resistance, Input-to-Output | VIO=500V, note 1 | 100 | Gohm | ||
| VCE(SAT) | Collector-Emitter Saturation Voltage | IF=20mA, IC=2.0mA | 0.4 | V | ||
| CIO | Capacitance, Input to Output | f=1MHz, note 1 | 0.5 | pF | ||
| TON | Turn-on Time | RL=100ohm, VCC=10V, IC=2mA | 15 | µs | ||
| TOFF | Turn-off Time | 15 | µs | |||
| Isolation Voltage, Input to Output | Note 1 | 4000 | Vrms | |||
1. Measured with input leads shorted together and output leads shorted
together.
Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date.