Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com
- Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Circuit
Features
Description
Absolute Maximum Ratings
Electrical
Characteristics
Similar Optocouplers
Home Page
Photo-Triac Output
4000 V Isolation
450 V Peak Blocking Voltage
Low
Cost Dual-In-Line Package
The IS607-IS608 are each an optically coupled isolator consisting of a
Gallium Arsenide infrared emitting diode and a light activated Silicon bilateral
switch mounted in a standard 6-pin dual-in-line package. Surface Mount Option Available.
All electrical
parameters are 100% tested by manufacturing. Specifications are guaranteed to a
cumulative 0.65% AQL.
Absolute Maximum Ratings (Ta=25°C) | |
| Storage Temperature: Operating Temperature: Lead Soldering: Input-to-Output Isolation Voltage: |
-55°C to +150°C -55°C to +100°C 260°C for 10s, 1.6mm from case ±4000 Vrms (Steady State) |
Input Diode | |
| Forward DC Current: Reverse DC Voltage: Peak Forward Current: Power Dissipation: Derate Linearly: |
60mA 3V 3A (1µs p.w. 300pps) 100mW 1.33mW/°C above 25°C |
Output PhotoTriac | |
| Off-State Output Terminal Voltage: RMS Forward Current: Forward Current (Peak): Total Power Dissipation: Derate Linearly: |
450V 100mA 1.2A (p.w.=10ms, DC=10%) 300mW 4.0mW/°C above 25°C |
| INPUT | PARAMETER | CONDITIONS | VALUE | |
|---|---|---|---|---|
| VF | Forward Voltage | IF=10mA | 1.5 V | Max |
| IR | Reverse Current | VR=3.0V | 10 µA | Max |
| VR | Reverse Breakdown Voltage | IR=10µA | 3.0 V | Min |
| OUTPUT | ||||
| IDRM | Peak Off-State Current | VDRM=450V | 100 nA | Max |
| Peak Blocking Voltage | IDRM=100nA | 450 V | Min | |
| VTM | On-State Voltage | ITM=100mA | 2.3 V | Typ |
| 3.0 V | Max | |||
| C | Critical Rate of Rise of Commutating Off-State Voltage dV/dt | ILOAD=15mA, VIN=30Vrms | 0.15 V/µs | Typ |
| COUPLED | PARAMETER | CONDITIONS | VALUE | |
| IFT | Input Current to Trigger | Main Terminal Voltage=3V, RL=150ohm | ||
| IS607 | 10 mA | Max | ||
| IS608 | 7 mA | |||
| Holding Current, either direction | Main Terminal Voltage=3V, Initiating Current=10mA | 100 µA | Typ | |
| Input-Output Isolation Voltage | Note 1 | 4000 Vrms | Min | |
1. Measured with input leads shorted together and output leads shorted
together.
Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date.