Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com
- Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Circuit
Features
Description
Absolute Maximum Ratings
Electrical
Characteristics
Similar Optocouplers
Home Page
Photo-SCR Output
5000 V Isolation
400V or 625V Peak Forward Voltage
Low
Cost Dual-In-Line Package
The IS606 is an optically coupled isolator consisting of a Gallium Arsenide
infrared emitting diode and light activated silicon controlled rectifier (SCR)
mounted in a standard 6-pin dual-in-line package. Surface Mount Option Available.
All electrical parameters are 100% tested. Specifications are guaranteed to
a cumulative 0.65% AQL.
Absolute Maximum Ratings: (Ta=25°C) | |
| Storage Temperature: Operating Temperature: Lead Soldering: Input-to-Output Isolation Voltage: |
-55°C to +150°C -55°C to +100°C 260°C for 10s, 1.6mm from case ±5000Vdc (Steady State) |
Input Diode | |
| Forward DC Current: Reverse DC Voltage: Peak Forward Current: Power Dissipation: Derate Linearly: |
60mA 3V 0.5A (50µs p.w. 120pps) 90mW 1.2mW/°C above 25°C |
Output Photo SCR | |
| Peak Forward Voltage: Forward Current (DC): Forward Current (Peak): Reverse Gate Current: Power Dissipation: Derate Linearly: |
400V (IS605) 625V (IS606) 100mA 1.0A (100µs p.w. 120pps) 1.0mA 200mW 2.67mW/°C above 25°C |
Package | |
| Total Power Dissipation: Derate Linearly: |
250mW 3.3mW/°C above 25°C |
| INPUT | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| VF | Forward Voltage | IF=20mA | 1.5 | V | ||
| IR | Reverse Current | VR=3.0V | 10 | µA | ||
| VR | Reverse Breakdown Voltage | IR=10µA | 3.0 | V | ||
| OUTPUT | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| VDM | Forward Blocking Voltage | RGK=27kohm, TA=100°C | ||||
| IS605 | 400 | V | ||||
| IS606 | 625 | V | ||||
| VRM | Reverse Blocking Voltage | RGK=10kohm, TA=100°C | ||||
| IS605 | 400 | V | ||||
| IS606 | 625 | V | ||||
| VTM | On-State Voltage | IT=100mA | 1.3 | V | ||
| IFX | Forward Leakage Current | RGK=27kohm, VDM=400V (IS606: 625V) | 2.0 | µA | ||
| IRX | Reverse Leakage Current | RGK=27kohm, VRM=400V (IS606: 625V) | 2.0 | µA | ||
| IHX | Holding Current | RGK=27kohm, VEX=50V | 0.01 | 0.50 | mA | |
| COUPLED | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| IFT | Input Current to Trigger | VFX=100V, RGK=27kohm | ||||
| IS605 | 11 | mA | ||||
| IS606 | 14 | mA | ||||
| RIO | Isolation Resistance | VO=500V, (Note 1) | 100 | Gohm | ||
| TON | Turn-on Time | IF=30mA, RGK=27kohm, VCC=20V | 8 | µs | ||
| Input to Output Capacitance | V=0, f=1MHz | 2 | pF | |||
| dV/dt Input to Output | Figure 1 | 500 | V/µs | |||
| Input-to-Output Isolation Voltage | t=1min, (Note 1) | 5000 | Vdc | |||
1. Measured with input leads shorted together and output leads shorted
together.
Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date.