Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com - Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com
- Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Circuit
Features
Description
Absolute Maximum
Ratings
Electrical Characteristics
Similar Optocouplers
Home Page
5000 Volt Isolation
AC or Polarity Insensitive Inputs
Fast Switching
Speed
Built-in Reverse Polarity Input Protection
Low Cost Dual-In-Line
Package
The IS604 is a bidirectional input optoisolator consisting of two Gallium
Arsenide infrared emitting diodes connected in inverse parallel coupled to an
NPN silicon phototransistor in a 6-pin dual-in-line package. Surface Mount Option Available.
All electrical parameters are 100% tested by manufacturing. Specifications
are guaranteed to a cumulative 0.65% AQL
Absolute Maximum Ratings: (Ta=25°C) | |
| Storage Temperature: Operating Temperature: Lead Soldering: Input-to-Output Isolation Voltage: |
-55°C to +150°C -55°C to +100°C 260°C for 10s, 1.6mm from case ±5000V |
Input Diode | |
| Forward DC Current: Reverse DC Voltage: Peak Forward Current: Power Dissipation: Derate Linearly: |
60mA 3V 1A (1µs pw 300 pps) 100mW 1.33mW/°C above 25°C |
Output Transistor | |
| Collector-Emitter Voltage BVCEO: Emitter-Base Voltage BVEBO: Collector-Base Voltage BVCBO: Power Dissipation: Derate Linearly: |
30V 5V 70V 150mW 2.00mW/°C above 25°C |
Package | |
| Total Power Dissipation: Derate Linearly: |
250mW 3.3mW/°C above 25°C |
| INPUT | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| VF | Forward Voltage | IF=±10mA | 1.5 | V | ||
| IR | Reverse Current | VR=3.0V | 10 | µA | ||
| VR | Reverse Breakdown Voltage | IR=10µA | 3.0 | V | ||
| OUTPUT | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| BVCEO | Collector-Emitter Voltage | IC=1mA | 30 | V | ||
| BVEBO | Emitter-Base Voltage | IE=100µA | 5 | V | ||
| BVCBO | Collector-Base Voltage | IC=100µA | 70 | V | ||
| ICEO | Collector-Emitter Dark Current | VCE=10V, IB=0 | 100 | nA | ||
| CCE | Collector-Emitter Capacitance | VCE=0 | 10 | pF | ||
| HFE | VCE=5.0V, IC=100µA | 100 | 150 | |||
| COUPLED | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| IC/IF | DC Current Transfer Ratio | IF=±10mA, VCE=10V, IB=0 | 50 | % | ||
| RIO | Input-to-Output Isolation Resistance | VIO=500V, note 1 | 100 | Gohm | ||
| VCE(SAT) | Collector-Emitter Saturation Voltage | IF=±10mA, IC=0.5mA | 0.4 | V | ||
| tR | Output Rise Time | VCC=10V, IC=2mA | 2.0 | µs | ||
| tF | Output Fall Time | RL=100ohm | 2.0 | µs | ||
| Input-Output Isolation Voltage | Note 1 | 5000 | V | |||
| IC/IC | Current Transfer Ratio Symmetry | Note 2 | 0.33 | 3.0 |
1. Measured with input leads shorted together and output leads shorted
together.
2. Specification guarantees the maximum peak output current will
be no more than three times the minimum peak output current at If=10mA.
CTR
Symmetry: IC(VCE=10V, IF=10mA) / IC(VCE=10V,
IF=-10mA)
Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date.