Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com
- Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Circuit
Features
Description
Absolute Maximum Ratings
Electrical
Characteristics
Similar Optocouplers
Home Page
Photo-Triac Output
4500 V Isolation
400 V Peak Blocking Voltage
Low
Cost Dual-In-Line Package
The IS3020 series are each an optically coupled isolator consisting of a
Gallium Arsenide infrared emitting diode and a light activated Silicon bilateral
switch mounted in a standard 6-pin dual-in-line package. Surface Mount Option Available.
All electrical
parameters are 100% tested by manufacturing. Specifications are guaranteed to a
cumulative 0.65% AQL.
Absolute Maximum Ratings (Ta=25°C) | |
| Storage Temperature: Operating Temperature: Lead Soldering: Input-to-Output Isolation Voltage: |
-55°C to +150°C -55°C to +100°C 260°C for 10s, 1.6mm from case ±4500 Vdc (steady state) |
Input Diode | |
| Forward DC Current: Reverse DC Voltage: Peak Forward Current: Power Dissipation: Derate Linearly: |
60mA 3V 3A (1µs p.w. 300pps) 100mW 1.33mW/°C above 25°C |
Output PhotoTriac | |
| Off-State Output Terminal Voltage: RMS Forward Current: Forward Current (Peak): Total Power Dissipation: Derate Linearly: |
400V 100mA 1.2A (p.w.=10ms, DC=10%) 300mW 4.0mW/°C above 25°C |
| INPUT | PARAMETER | CONDITIONS | VALUE | |
| VF | Forward Voltage | IF=10mA | 1.5 V | Max |
| IR | Reverse Current | VR=3.0V | 10 µA | Max |
| VR | Reverse Breakdown Voltage | IR=10µA | 3 V | Min |
| OUTPUT PHOTO TRIAC | ||||
| IDRM | Peak Off-State Current | VDRM=400V | 100 nA | Max |
| VDRM | Peak Blocking Voltage | IDRM=100nA | 400 V | Min |
| VTM | On-State Voltage | ITM=100mA | 2.3 V | Typ |
| 3 V | Max | |||
| C | Critical Rate of Rise of Commutating Off-State Voltage dV/dt | I=15mA, VIN=30Vrms | 0.15 V/µs | Typ |
| COUPLED | PARAMETER | CONDITIONS | VALUE | |
| IFT | Input Current to Trigger | Main Terminal Voltage=3V, RL=150ohm | ||
| IS3020 | 30 mA | Max | ||
| IS3021 | 15 mA | |||
| IS3022 | 10 mA | |||
| IS3023 | 5 mA | |||
| IS3024 | 3.5 mA | |||
| Holding Current, either direction | Main Terminal Voltage=3V | 100 µA | Typ | |
| Input-Output Isolation Voltage | Initiating Current=10mA | 4500 Vrms | Min | |
Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date.