Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com
- Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Circuit
Features
Description
Absolute Maximum Ratings
Electrical
Characteristics
Home Page
 |
IS1, IS5 | Similar Optocouplers |
 |
ISD1, ISD5 | Similar Optocouplers |
 |
ISQ1, ISQ5 | Similar Optocouplers |
2500 V Isolation.
High Current Transfer Ratio.
Low Cost Dual-In-Line Package.
The IS5, ISD5 and ISQ5 is each an optically coupled isolator. Each channel
consists of a Gallium Arsenide infrared emitting diode and an NPN silicon
phototransistor mounted in a standard dual-in-line package. Surface Mount Option Available.
All electrical parameters are 100% tested by manufacturing. Specifications
are guaranteed to a cumulative 0.65% AQL.
Absolute Maximum Ratings (Ta=25°C) | |
| Storage Temperature: Operating Temperature: Lead Soldering: Input-to-Output Isolation Voltage: |
-55°C to +150°C -55°C to +100°C 260°C for 10s, 1.6mm from case ±2500Vdc (note 1) |
Input Diode | |
| Forward DC Current: Reverse DC Voltage: Peak Forward Current: Power Dissipation: Derate Linearly: |
60mA 3V 1A (pw.=100µs, duty ratio 0.001) 100mW 1.33mW/°C above 25°C |
Output Transistor | |
| Collector-Emitter Voltage: Emitter-Collector Voltage: Power Dissipation: Derate Linearly: |
30V 7V 150mW 2.00mW/°C above 25°C |
Package | |
| Total Power Dissipation: Derate Linearly: |
500mW (ISQ1,5) 400mW (ISD1,5) 200mW (IS1,5) 6.67mW/°C above 25°C |
| INPUT | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| VF | Forward Current | IF=60mA | (IS*5: 1.3) | 1.5 | V | |
| IR | Reverse Current | VR=3V | 10 | µA | ||
| OUTPUT | ||||||
| BVCEO | Collector-Emitter Voltage | IC=1mA | 30 | 50 | V | |
| BVECO | Emitter-Collector Voltage | IE=0.1mA | 7 | 8 | V | |
| ICEO | Collector-Emitter Dark Current | VCE=10V | 50 | nA | ||
| COUPLED | ||||||
| IC/IF | DC Current Transfer Ratio | IF=10mA, VCE=10V | ||||
| IS1, ISD1, ISQ1 | 20 | 50 | % | |||
| IS5, ISD5, ISQ5 | 50 | 80 | % | |||
| VCE(SAT) | Collector-Emitter Saturation Voltage | IF=16mA, IC=1.6mA | 0.2 | 0.5 | V | |
| CF | Floating Capacitance | V=0, f=1MHz | 0.6 | 1 | pF | |
| Input-Output Isolation Resistance | VIO=500V (note 1) | 500 | Gohm | |||
1. Measured with input leads shorted together and output leads shorted
together.
Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date.