Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com - Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com
- Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Circuit
Features
Description
Absolute Maximum
Ratings
Electrical Characteristics
Reliability and Approvals
Similar
Optocouplers
Home Page
Small outline package
High radiance LED
Silicon phototransistor
Suitable
for hybrid sub assembly mounting
Electrical contact by means of wire bonding
Low
input current
The CH300 is a single channel device in a small outline package suitable for
mounting in hybrid sub assemblies. Electrical contact is made by wire bonding to
the gold thick film contacts on the perimeter of the device.
The device
incorporates a high radiance LED and phototransistor.
The isolator
operational parameters are guaranteed from -55°C to +125°C
High Density hybrid sub assemblies, Military high rel. systems, Switch mode power supplies, Medical instrumentation, System test equipment, Signal transmission between circuit of different potential and impedance.
Absolute Maximum Ratings (Ta=25°C) | |
| Storage Temperature: Operating Temperature: Input-to-Output Isolator Voltage: |
-65°C to +150°C -55°C to +125°C ±500Vdc |
Input Diode | |
| Forward DC Current: Reverse DC Voltage: Peak Forward Current: Power Dissipation: |
15mA 5V 1.5mA (t<=10µs non-repetitive) 25mW |
Output Transistor | |
| Collector-Emitter Voltage BVceo: Emitter-Collector Voltage BVeco: Collector Current: Collector Current: Power Dissipation: Derate Linearly: |
30V 7V 20mA 100mA (t=1ms non-repetitive) 100mW 1.4mW/°C above 100°C |
(Ta=-55°C to +125°C u.o.s.; all Typical values at 25°C)
| INPUT | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| VF | Forward Voltage | IF=10mA | 1.2 | 1.5 | V | |
| VBR | Input Reverse Breakdown | IR=10µA | 5 | V | ||
| BVCEO | Collector-Emitter Breakdown Voltage | IC=1mA | 30 | V | ||
| BVECO | Emitter-Collector Breakdown Voltage | IE=0.1mA | 7 | V | ||
| CTR | DC Current Transfer Ratio | IF=1mA, VCE= 5V, TA=+25°C | 50 | 150 | % | |
| IF=1mA, VCE= 5V | 35 | % | ||||
| VCESAT | Collector-Emitter Saturation Voltage | IF=2mA, IC=0.2mA | 0.25 | V | ||
| VIO | Isolation Voltage | 500 | Vdc | |||
| tON | Turn On Time | RL=100ohm, VCE=5V, IF=1mA | 25 | µs | ||
| tOFF | Turn Off Time | µs |
Isocom Ltd supplies high reliability devices for applications requiring an
operating temperature range of -55°C to +125°C (e.g. military
applications).
Devices supplied have completed rigorous testing, and various high
reliability test options are offered. The Company is developing a suitable
specification to permit release to CECC 20000.
As a manufacturer of high reliability optocouplers Isocom Ltd's
manufacturing plant in North East England, has site approval to BS9000
(registered number 1294/M) issued by the British Standards Institution. Together
with CECC, BS9000 is a preferred standard for use in European military projects.
Consequently, Isocom Ltd's approved devices are listed in the CECC "MUAHAG"
preferred products list.
The BS9000 approval is also recognised as meeting the equivalent criteria
to those required by BS5750/ISO9000/EN29000.
The Company's customers can be assured of our commitment to stringent
quality, reliability and inspection standards, as demonstrated by our existing
approvals. Other customer-specific options can also be offered.
Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date.